"Invisible" 360 Drones are a cool concept, but...

Intrattenimento

Sorry about the weird audio bugs.. I found that I had a cable going bad, and I've since swapped it out for my next video, so don't you worry! I've found and addressed it. This is the X Knight 360 from BetaFPV, and the goal is for it to be a BNF 360 camera drone that houses an Insta360 One R 360 mod inside of it so that the drone is completely invisible to the stitch line. However, in testing, I found a few things that are less than ideal, and I'm giving BetaFPV an opportunity to help resolve the problems!
Purchase the Insta360 Camera Used here: bit.ly/nurkoner2
Check out the X Knight: bit.ly/nurkxknight
Consider following me through memberships: bit.ly/nurkmembership
or on Patreon: bit.ly/nurkpatreon
DJI Products:
Get Started with DJI: - bit.ly/3crk3l1
DJI but I want my own radio: -bit.ly/3crk3l1
DJI Receiver Directional Antennas: TrueRC Patch for DJI - bit.ly/3cs3xBi (requires 2, not necessary, but amazing)
DJI Receiver Omni Antennas: TrueRC Stubby Singularity - bit.ly/3cqC2rD (purchase 1, comes with 4)
Learn to build a drone!: itwindow.info/door/video/gqWInL10r6COits.html
Full parts list on this drone with affiliate links:
Motors: bit.ly/2QlgSnc
Flight Controller: bit.ly/2AmUZxq
ESC: Hobbywing 60a - bit.ly/2xUKTCX
Video Transmitter: bit.ly/3fOfYJV
Receiver: bit.ly/3fOfYJV
Frame: Project 399 SuperG - bit.ly/2zUGAVo
Camera : bit.ly/3fOfYJV
Lipo: CNHL Ministar 6s - bit.ly/2WSCOHx
Prop: Azure 5150 - bit.ly/2WrvuUj
Other Peripherals:
Goggles: Fatshark HDO - bit.ly/nurkhdo
DJI Goggles: DJI Goggles and 2 Air Units - bit.ly/nurkdjinoradio
Goggle Receiver Module: IMRC Rapidfire - bit.ly/nurkrapidfire
Goggle DVR Accessory: IMRC Powerplay - bit.ly/nurkpowerplay
Goggle Battery Replacement: 18500 Batteries - bit.ly/34ywCHm (go in powerplay)
Radio: Taranis 9XD - bit.ly/nurktaranis
TBS Crossfire : TBS Crossfire - bit.ly/nurkcrossfire
Patch Antenna : TrueRC MX2 Patch Antenna - bit.ly/nurkmx2
Omni Antenna: TrueRC Matchstick Long - bit.ly/nurktruercmatchsticklong
FPV Bag: Think Tank FPV Airport - bit.ly/2DW67OT
Solder: - bit.ly/nurksolder
Soldering Iron: TS100 - bit.ly/nurksolderingiron
Lipo Charger: HOTA 15A - bit.ly/nurkhota
Drone Camera: GoPro Hero Session 5 // amzn.to/2DgXb5I
Drone Camera: GoPro Hero 6 // amzn.to/2lfJKvE
Big Main Vlogging Camera: Sony A7III // amzn.to/2N3ogSh
Big Main Vlogging Camera Wide Lens: Sony 10-18 // amzn.to/2PNI5ff
Big Main Vlogging Camera Long Lens: Sony 85 1.8 // amzn.to/2MCxiq0
Mic for Vlogging Camera: Rhode Video Mic Go // amzn.to/2l1lcqz
Tripod in the Sky: DJI Mavic // amzn.to/2BHrJNq
My awesome Pants: amzn.to/2kZ3ZOQ
Ultimate FPV Harddrive:
Western Digital My Wireless Passport Pro
4TB: amzn.to/2t8dilZ
3TB: amzn.to/2HXH2p5
2TB: amzn.to/2F5J708
Thanks to each of my sponsors:
Hobbywing
RunCam: www.runcam.com/
FPV-Direct: www.fpv-direct.com/
Futaba: www.futabarc.com/
China Hobby Line: chinahobbyline.com/
AirVuz: www.airvuz.com/
Hire my production company, Cinactive Media:
Cinactive-Media-124135864968965/
or
cinactive.com
Check out my other videos! itwindow.info
Follow me on Instagram: nurkfpv
Tweet at me on Twitter: nurkfpv
#gopro #review #fpv

Commenti

  • NURK FPV
    NURK FPV6 mesi fa

    Purchase the Insta360 Camera Used here: bit.ly/nurkoner2 Check out the X Knight: bit.ly/nurkxknight

  • Rob FPV

    Rob FPV

    6 mesi fa

    Hey Nurk, I tried messaging you on Instagram. I have my own 360 frame design I wanted you to try. You could potentially take the guts of the beta and put them on my frame. Feel free to message me and I will get you one of my frames

  • Andrew F.

    Andrew F.

    6 mesi fa

    HAPPY 100K BUDDY!

  • Piter Admski
    Piter AdmskiMese fa

    When you fly without gogles its stable mode or acro ?

  • Docfpv
    DocfpvMese fa

    There's always been a screw missing Bro. LOL! ✌🙏💚

  • Saranjivac
    SaranjivacMese fa

    Did they send it back yet? Really interested in these 360 invisible drones. Perhaps we can just use the frame and create something custom?

  • Checkered Flag Films
    Checkered Flag FilmsMese fa

    Did they ever follow up with you, send a another example back for review purposes?

  • HUW 05039
    HUW 050392 mesi fa

    Good review! +1

  • Jesse Timber
    Jesse Timber3 mesi fa

    mine was keep moving backward when i try to test fly don't know why

  • Kellee Duff
    Kellee Duff3 mesi fa

    So the company we buy the drone from does not respond to any support texts. I cannot bind my x-night, because I do not know where the freaking button is. There is no information this channel does not have a video on where it is. There are no videos there are no instruction manuals and there's no way for me to find this bind

  • Davide Fossati

    Davide Fossati

    18 giorni fa

    @Kellee Duff I managed to bind it, thank you! :-)

  • Kellee Duff

    Kellee Duff

    18 giorni fa

    @Davide Fossati I helped the vine button down on the drone while I was holding it I pressed the mind button on the remote.

  • Davide Fossati

    Davide Fossati

    18 giorni fa

    @Kellee Duff thanks I found the button! However, when I press it, there is a green light that flashes twice and then it goes back to intermittent red flashing. I tried to press the "bind" button on the radio transmitter (BetaFPV LiteRadio 2 SE) at the same time, but nothing happened. Any hint?

  • Kellee Duff

    Kellee Duff

    18 giorni fa

    @Davide Fossati if you can find that little rectangle there is the button is very difficult to see but it is there. I use a paperclip to push it, I asked instant 360 and they gave me all the information I needed. FPV is a bad company, no instructions, and dumb, treats us like we're the dummies

  • Kellee Duff

    Kellee Duff

    18 giorni fa

    @Davide Fossati they sent me the wrong drone, I happened to find the bind button. I've got it all worked out now. On the drone there is a rectangle that's hanging on by wires.

  • Kellee Duff
    Kellee Duff3 mesi fa

    Ok, I own the drone, no instructions, Your video skipped the binding, thanks for that. video no binding information. Been using 360 cameras for 2 years now. This drone is pissing me off

  • Kellee Duff

    Kellee Duff

    3 mesi fa

    @Gaukert hey why don't you goodle it, or ITwindow search, you will find what I found.....nothing. no manuals to download. and the useful information still did not work, due to BetaFVP sending me the wrong drone.

  • Kellee Duff

    Kellee Duff

    3 mesi fa

    @Gaukert the drone they sent me is not frisky, receiver is TBS, SHOULD OF BEEN FRISKY. That was my issue, the whole time it was betafpv screw up. But thanks for your rudeness,

  • Kellee Duff

    Kellee Duff

    3 mesi fa

    @Gaukert ok Mr rude,

  • Gaukert

    Gaukert

    3 mesi fa

    It's a review, not a unpacking / set up guide. Funny thing aswell, you can fucking use the search bar in ITwindow and find a instruction video on how to bind your receiver or read a manual for gods sake. How hard can it be... This video was great but it requires a certain amount of brain cells to realize that.

  • Thomas Vega
    Thomas Vega3 mesi fa

    I like his honesty from a consumers point of view. Granted you may not always want to use a drone for reasons like weather, wind ect but it should be functional after all that you pay for it and his broke on the very 1st flight, We need a reliable GSP hoover mode, we need for the camera for follow the rider or participant in an automated fashion unless it is untethered for aerial footage....the Invisable 360 concept is a good step up but we just arent there yet. Thomas

  • Phil Pearce / Life Experience
    Phil Pearce / Life Experience3 mesi fa

    Can anyone recommend a good compatible r/c for this?

  • McFlight
    McFlight4 mesi fa

    is the bec wired to 5v or batt voltage?

  • Centrifugal Productions
    Centrifugal Productions4 mesi fa

    Invisible 360 footage and the possibilities with the footage is what interests me the most about FPV quads. Too bad this wasn’t a good experience. I can’t wait for this tech to work right.

  • Louie F
    Louie F4 mesi fa

    My Meteor65 is having the same video cut outs, I know its only a 25mW VTX but I feel like I should be able to fly it in my house without that happening. Did you ever figure out why yours was doing that?

  • ZagZagSama
    ZagZagSama5 mesi fa

    same effect can be achieved with 2 insta 360 GO glued on top and bootom of the drone then merged the footages in post.

  • Jason Todd Roberts
    Jason Todd Roberts5 mesi fa

    As if the touch screen isn't hard enough to use already. In the case it looks almost impossible.

  • Jason Todd Roberts
    Jason Todd Roberts5 mesi fa

    Why was I counting how many times he set the camera on its lens!! Thanks until now I was regretting getting the One R over the X2.

  • Jason Todd Roberts

    Jason Todd Roberts

    5 mesi fa

    Your audio is very hard to hear. You should get this and increase your volume to -3 db with the maximizer.www.izotope.com/en/shop/ozone-9-standard.html

  • cj691
    cj6915 mesi fa

    Yikes! I'm glad it landed in grass for the sake of your lenses. That VTX antenna is also REALLY close to carbon fiber and a metal standoff...

  • Manny C
    Manny C5 mesi fa

    LOL - A bit ironic that the name of the company is Beta FPV, meanwhile, they’re putting out products that appear to still be in the beta stage of development.

  • CHOPPER GIRL
    CHOPPER GIRL5 mesi fa

    How do you land it without scratching up your bottom lenses. I've noticed all of these style god mode builds are completely lacking a servo controlled retractable landing gear that would protect the bottom camera. fpv.air-war.org

  • Heretic
    Heretic5 mesi fa

    Seems like Cine-Bird from StanFPV have waay better construction.

  • Jason Kenney
    Jason Kenney5 mesi fa

    "These are the hardest parts to replace" *Sets 360 camera lens directly on dirty bench*

  • J. Stronsky
    J. Stronsky5 mesi fa

    Really appreciate the honest review

  • Glenn Johnson
    Glenn Johnson6 mesi fa

    I purchased this, but the DJI version, and while installing the camera, the screw heads were popping off. I didn’t over tighten, especially after the first pop. Good news is that the leftover studs were easy to remove. The problem is that the standoffs are not tall enough so much more stress on the screws. I ended up removing the countersunk screws and replaced with the extra prop screws that came with it. It works great for me now, except i can’t find a small enough battery.... they sold out of the ones that are recommended

  • Push That
    Push That6 mesi fa

    Is there any other type of drone that works for the insta360. And actually protect the lens? I'm excited about that technology. Good video

  • 4DCResinSmoker
    4DCResinSmoker6 mesi fa

    So what is the purpose of something like this ?

  • SparkyCorkers ¿
    SparkyCorkers ¿6 mesi fa

    I was thinking about getting one of these for my insta 360, but I think I'll wait for a v2. Motors shouldnt bend that easy!

  • David Rieck
    David Rieck6 mesi fa

    Yeah BETAFPV has shitttt QC

  • Brett Mathiesen
    Brett Mathiesen6 mesi fa

    The camera being off center i would think would make flying FPV would be weird hahaha

  • Brian Langford
    Brian Langford6 mesi fa

    Beta fan,but thats the ugliest thing i ever saw

  • NURK FPV

    NURK FPV

    6 mesi fa

    hahaha it is kinda crazy looking!

  • 360Rumors
    360Rumors6 mesi fa

    Thanks for your first impressions! I've shared it on 360 Rumors. I hope BetaFPV improves the durability.

  • ram udu
    ram udu6 mesi fa

    Bro congrats for 100k subs

  • Jätski.fi
    Jätski.fi6 mesi fa

    if you duct a whoop with vectored arms, fully enclosed, harrier drone

  • Phillip Hendrix
    Phillip Hendrix6 mesi fa

    Finally a review that isn't sensational AND says that it will return the product to the company with comments for improvement as opposed to this company is trash don't use/trust it.

  • AuthenTech - Ben Schmanke
    AuthenTech - Ben Schmanke6 mesi fa

    Congrats on the 100k!

  • Tobias Jensen
    Tobias Jensen6 mesi fa

    I think i just subscribed as nr 100.000

  • dyk0n
    dyk0n6 mesi fa

    Did the 360 camera end up being busted completely? Or do those things snap back together?

  • NURK FPV

    NURK FPV

    6 mesi fa

    Snap back together no problem

  • JayQ FPV
    JayQ FPV6 mesi fa

    There is Jello on the stitching line because the insta 360 is hard mounted between the carbon plates. Very stupid idea.. The Stan FPV cinebird has a TPU mount for the insta 360 one r and there is zero jello. Who on earth would mount an action camera between the top and bottom plate of a normal Drone? I guess every Gopro would suffer from jello if it was mounted that way

  • Rhett Wiebe
    Rhett Wiebe6 mesi fa

    I'm a beginner to fpv, and just noticed that the fpv camera isn't centered on this quad... Isn't this gonna be irritating?

  • Rhett Wiebe

    Rhett Wiebe

    6 mesi fa

    @András Piroska oh yeah that car comparison makes a lot of sense... Just thought that it might be important because it's so immersive... And I wasn't planning on starting with this one, just thought the idea and concept looked interesting

  • András Piroska

    András Piroska

    6 mesi fa

    Probably not that much... you also drive aside in the car ;) If you begin, don't start with this drone for sure.

  • AWOLASAP
    AWOLASAP6 mesi fa

    Notice you and Steele both have sim racing setups, you guys race together?

  • ONCLEFLY
    ONCLEFLY6 mesi fa

    Hi nurk, good idea quad, but bad quad 😢

  • Tom Irwin
    Tom Irwin6 mesi fa

    Nice!👍

  • Mos Atski
    Mos Atski6 mesi fa

    Great idea mate

  • Spartan 329
    Spartan 3296 mesi fa

    usb extension www.readymaderc.com/products/details/rmrc-micro-usb-extension

  • Quelqu'un
    Quelqu'un6 mesi fa

    Hi Nurk, Do you think it is possible to fly this drone without the camera?

  • James Benson
    James Benson6 mesi fa

    Dope

  • emgee44
    emgee446 mesi fa

    I like the concept but this still needs work, I’ll wait for version 2 I think.

  • Propagnda X
    Propagnda X6 mesi fa

    Someone ha probably said it but the AIO probably has too much Draw on it from all the accessories it’s powering, VTX, Cam, Rx and the additional draw from the Insta360? Slam a few more caps on and miiiight have more luck with the stock build.

  • Cyclimbo
    Cyclimbo6 mesi fa

    That bottom lens is gonna get F'ed

  • John Henry Dale

    John Henry Dale

    5 mesi fa

    yyup. needs some kind of feet on the bottom that will protect it for sure.

  • Metro Drones
    Metro Drones6 mesi fa

    Looks like a pretty good idea... Sorry you had issues.. May be 2.0 will be better :) Be cool man

  • Jake Kisiel
    Jake Kisiel6 mesi fa

    I hate BetaFPV. If you agree, like this comment.

  • Matthis Rivard
    Matthis Rivard6 mesi fa

    What a company ahaha betafpv is such a joke and yet could be such an amazing company! Always very reactive to new innovations but they seriously need to pay more attention to details and one day they might finally sell a finished product...who knows

  • Techno Xtreme
    Techno Xtreme6 mesi fa

    Please tell them we need a "disposable" glass lens cover for the bottom or a micro-servo mechanism to act as a shutter when you hit a switch to land or failsafe.

  • Kevin BeltBoost

    Kevin BeltBoost

    6 mesi fa

    @András Piroska That's why a few of the others like StanFPV and RobFPV make a frame that accommodates the Insta360's housing. I feel those are a superior design because who wants to scratch / break a lens on a $600 camera.

  • András Piroska

    András Piroska

    6 mesi fa

    Insta360 sells lens protectors, but they cant be applied on that frame. In fact you need the genuine housing. Any additional glass just gonna harm the image quality and stitch line.

  • Peter Zingler
    Peter Zingler6 mesi fa

    2020 the year where racing drones finally came down to the power to weight ratio of dji phantoms.

  • cinIALVEspO w

    cinIALVEspO w

    6 mesi fa

    Wait what? Phantoms have power to weight ratio of a racing drone? Since when

  • FPV nWV
    FPV nWV6 mesi fa

    Hmmm. Any bets on whether betafpvs head of xknight 360 dept

  • NURK FPV

    NURK FPV

    6 mesi fa

    rofl

  • FPV nWV

    FPV nWV

    6 mesi fa

    Calls in sick tom😜

  • Rodrigo Sclosa FPV
    Rodrigo Sclosa FPV6 mesi fa

    I got the same issue with osd and camera with same AIO from BetaFPV... i bought it spare to build a 6s Toothpick and it has power issues, because if I put a 2000uF capacitor, it got better but dont solve the issue...

  • Rodrigo Sclosa FPV

    Rodrigo Sclosa FPV

    6 mesi fa

    @Peter Zingler yeah... i think that’s the problem... i’ve contacted betafpv support and asked they about this issue.. they’ll send me another board, but I dont think it ‘ll be solved... In other hand, I got a HifionRC AIO F7 with 45A escs, putted it on my 7” toothpick with 2306 of 2450kv motors and it is running amazing perfectly!

  • Peter Zingler

    Peter Zingler

    6 mesi fa

    Thats because the escs might handle the amps but the board itself can not. You can. Simply not put the needed copper thickness on the traces. If they would do the board would be 10 times thickee

  • NURK FPV

    NURK FPV

    6 mesi fa

    hmmmm that's interesting to hear.

  • John Strand
    John Strand6 mesi fa

    must be cold up there, you're wearing socks! Thanks for the great review.

  • NURK FPV

    NURK FPV

    6 mesi fa

    hahaha yepppp.. the garage floor is pretty chilly

  • Schnurr
    Schnurr6 mesi fa

    A bent bell in grass.

  • NURK FPV

    NURK FPV

    6 mesi fa

    ikr?

  • Reecefpv
    Reecefpv6 mesi fa

    I just got some of the magnetic usb that bardwell recommended and they are so awesome they work at any position too

  • Reecefpv

    Reecefpv

    6 mesi fa

    @NURK FPVthey were called netdot I got a 3 Pak of 6.6 ft cords for like 18$. And so far they are really nice. But they have 90 degree and straight ones . Just gotta make sure it's one with the round connector. Cause it will work in any position. And it come with micro ,type c and iphone. All 3 with each cord so u get all kind of plugs to just leave in things. And just snap it on anytime, oh and saves usb socket from getting jerked really hard too.

  • NURK FPV

    NURK FPV

    6 mesi fa

    oh that's a great idea

  • Reecefpv
    Reecefpv6 mesi fa

    They probably should of uses a plug with wires or something stronger that that 90 degree adapter. Those break so easily. Just by plugging it in and out.

  • NURK FPV

    NURK FPV

    6 mesi fa

    hmm yeah that's a good point.

  • Nature with drone makis theodorou
    Nature with drone makis theodorou6 mesi fa

    Beautiful video, thanks for sharing,!!!!

  • NURK FPV

    NURK FPV

    6 mesi fa

    Thank you too

  • RC Ritter FPV
    RC Ritter FPV6 mesi fa

    This is why I "Joined" - thanks for "Keepin it 100" Side note... best HD whoop with Crossfire? flying around yard, near kids.? tree tops...

  • Yeet man The third

    Yeet man The third

    6 mesi fa

    My favorite cinewhoop

  • NURK FPV

    NURK FPV

    6 mesi fa

    Shendrones squirt for sure!~

  • Yeet man The third

    Yeet man The third

    6 mesi fa

    I recommend you go with a cinewhoop. They will be much more durable and have a longer flight time.

  • Dron-o-Tron
    Dron-o-Tron6 mesi fa

    What it needs is a tpu mount for the 360 camera

  • NURK FPV

    NURK FPV

    6 mesi fa

    yeah but I mean the lenses still have to peak out so that they don't see the droen

  • MC's Creations
    MC's Creations6 mesi fa

    Pretty nice, Paul! 😊 Great and honest review! Stay safe there with your family! 🖖😊

  • NURK FPV

    NURK FPV

    6 mesi fa

    thanks for watching!

  • Marcus Ritter
    Marcus Ritter6 mesi fa

    Great Video. I buid my own invisible 360 drone frame design that has an automated lens cover. I start buiding this kind of drones 3 years ago using a Samsung Gear 360 and I always was concerend about scratching the lens. This is my frame presentation video: itwindow.info/door/video/YYCCorNq0nO6dr0.html

  • Hola ACchillin
    Hola ACchillin6 mesi fa

    Super cool video! I want one! Thumbs up

  • NURK FPV

    NURK FPV

    6 mesi fa

    Thank you 🤗

  • Litter Bug
    Litter Bug6 mesi fa

    Short USB extension, or a Bluetooth adapter would work.

  • NURK FPV

    NURK FPV

    6 mesi fa

    yeah but *I* the consumer shouldn't need to be responsible for that.

  • Pilot Z
    Pilot Z6 mesi fa

    The lens must be replaceable yeah.

  • NURK FPV

    NURK FPV

    6 mesi fa

    it is

  • SkyBug Productions
    SkyBug Productions6 mesi fa

    Great review

  • NURK FPV

    NURK FPV

    6 mesi fa

    cheers and thanks for watching

  • audiogek fpv
    audiogek fpv6 mesi fa

    These motors with 1.5 and 2mm motor shaft for 5" props are a disaster. Buddy of mine broke I don't how many sets.

  • NURK FPV

    NURK FPV

    6 mesi fa

    goooooood to know

  • Lukasnator7
    Lukasnator76 mesi fa

    Honestly this review is the perfect example of BetaFPV in general. They're just aiming to be the first one's to bring something new to the market which isn't fully thought through or even decently working. I mean they are more in the premium category in terms of price with their products in most categories but just delivery crap... Didn't regret replacing my betaFPV drones with any other manufacturer. For sure a company to avoid...

  • BikeGuy_FPV

    BikeGuy_FPV

    6 mesi fa

    Even then, this is not the first thing to hit the market. The Cinebird was the original one to come out from StanFPV.

  • Nik Leiser
    Nik Leiser6 mesi fa

    Great Review. Definitely worth a Revisit.

  • NURK FPV

    NURK FPV

    6 mesi fa

    i'm confident that we will revisit!

  • Yawman Flights
    Yawman Flights6 mesi fa

    Man thanks for your honest reviews man. I love the idea though

  • NURK FPV

    NURK FPV

    6 mesi fa

    it's definitely on the right track, but not perfect yet.

  • Peter Foley
    Peter Foley6 mesi fa

    I just found that the stitch line never looked good. (GoPro Max) Flying in trees the lines wouldn't match up and weird color variations in the sky. Always just looked cheesy in my experimetation.

  • NURK FPV

    NURK FPV

    6 mesi fa

    yeah totally agree so far - 360 cameras still have way to go before they're perfect, but it's a fun experinment with what could be possible for now

  • Brandon Bentley
    Brandon Bentley6 mesi fa

    The way you got wrapped around that arm while removing the card and got stuck. Hard LOL

  • NURK FPV

    NURK FPV

    6 mesi fa

    hehehe

  • Johannes Huß
    Johannes Huß6 mesi fa

    After about 10 packs, mine is still working pretty well. Ordered the Vista version though.

  • Matt Chamberlain
    Matt Chamberlain6 mesi fa

    Need to add a small servo & some type of landing gear that can be retracted after take off and before landing to keep from damaging the lens.

  • András Piroska

    András Piroska

    6 mesi fa

    I just put down my coat or some textile. Servos and things are just weight and option to go wrong.

  • NURK FPV

    NURK FPV

    6 mesi fa

    that's a great idea and would be pretty simple to do I think

  • Harvey Bince
    Harvey Bince6 mesi fa

    does that mean that we can all buy that "L" Adapter to use the one R without battery with any drone?

  • Aerial-Pixel

    Aerial-Pixel

    6 mesi fa

    I've been using the one from iFlight for all my GoPro's lately, really shaves some weight off, especially on the Hero Black 9 saves about 45 grams with the battery and the door removed.

  • Harvey Bince

    Harvey Bince

    6 mesi fa

    @NURK FPV just checked betafpv site and they don't have any cable, adapter or anything for the one R. Hope they get it soon.

  • NURK FPV

    NURK FPV

    6 mesi fa

    absolutely you can - betafpv sells them I elieve

  • Harvey Bince

    Harvey Bince

    6 mesi fa

    @Bobby Baggs where did you see those? I would love to get my one R with my Drone! Also have you seen any one R (without battery) mount?

  • Bobby Baggs

    Bobby Baggs

    6 mesi fa

    Yea man there is also a cable version that your can get. It has the usb c on one end and the male jst balance port on the other side. It's also not as stiff as the L so you can run it how ever way you like.

  • Seth Bartschi
    Seth Bartschi6 mesi fa

    Good review. My opinion has been the same. I’m excited for the possibilities that 360 cameras will eventually bring. But for me that stitch line-even at a distance-is distracting and a deal breaker. I would also like to see more resolution and a higher bit rate.

  • András Piroska

    András Piroska

    6 mesi fa

    @NURK FPV I think this has some potential, just need to be avare of its limitations.

  • NURK FPV

    NURK FPV

    6 mesi fa

    it's fun for silly social stuff, but it wouldn't ever pass in a professional environment

  • Mitchell Hoek
    Mitchell Hoek6 mesi fa

    Thanks for being honoust man! The idea is absolutily amazing but performance is horrible! Ill wait for the upgrade haha

  • NURK FPV

    NURK FPV

    6 mesi fa

    always trying to be honest!

  • Alex Karatzky
    Alex Karatzky6 mesi fa

    Congrats on 100k!!!

  • NURK FPV

    NURK FPV

    6 mesi fa

    eyyy thank you so much! So stoked to be here

  • EviGL Павел
    EviGL Павел6 mesi fa

    Wow, that's a great concept. I didn't know drones like this exist, but I really wanted them to exist. I'll be waiting for a next video on this to see some great footage. You can also upload a 360 footage to ITwindow next time so I can get sick in VR :)

  • NURK FPV

    NURK FPV

    6 mesi fa

    Definitely more to come!

  • halitic fpv
    halitic fpv6 mesi fa

    Good ol' BetaFPV quality

  • NURK FPV

    NURK FPV

    6 mesi fa

    dooo dee doo

  • Wüdz_fpv
    Wüdz_fpv6 mesi fa

    Must be a world's first... 😉

  • NURK FPV

    NURK FPV

    6 mesi fa

    nah

  • James
    James6 mesi fa

    Hey Nurk - not specific comment for this video however it occurred to me that a really useful place for you and for drone users were if you became a member of Skydio. Its obvious that you could be developing technology at the source instead of giving free consultation to Chinese drone companies post product launch of what are poorly developed products / technology

  • Kyle Li
    Kyle Li6 mesi fa

    I've been looking at these ever since stanfpv made his ages ago - but I need slightly higher resolutions to work with :( C'mon gopro, give us a Max 2

  • András Piroska

    András Piroska

    6 mesi fa

    Qoocam 8K? 10bit! However the menus and workflow is a bit frightening me...

  • Kyle Mcilroy

    Kyle Mcilroy

    6 mesi fa

    Hey @NURK FPV have you tried anything from the OG StanFPV?

  • NURK FPV

    NURK FPV

    6 mesi fa

    max 2 would be sick

  • RapterKingoftheBrozone
    RapterKingoftheBrozone6 mesi fa

    Is there a power brick touching your microphone cable? :)

  • RapterKingoftheBrozone

    RapterKingoftheBrozone

    6 mesi fa

    @NURK FPV hahahaha okay. Had a similar issue with my audio on a stream. Turns out that was the issue. Just had a power brick for a monitor resting against the mic cable. Funny that. Lol

  • NURK FPV

    NURK FPV

    6 mesi fa

    nope it was just a faulty cable

  • RapterKingoftheBrozone

    RapterKingoftheBrozone

    6 mesi fa

    Hmmm... maybe a like.... 3 degree tilt to the body of the frame would help keep the lens off the ground when landing and taking off. Maybe even shallower to keep the props invisible.

  • Jordan Ebner
    Jordan Ebner6 mesi fa

    HUUUUUUUUUMMMMM

  • Jordan Ebner

    Jordan Ebner

    6 mesi fa

    @NURK FPV thanks sorry now I feel like a dick. Glad it's fixed though I love your videos!

  • NURK FPV

    NURK FPV

    6 mesi fa

    Ohyeah... It's fixed for the next videos

  • Jordan Ebner

    Jordan Ebner

    6 mesi fa

    @NURK FPV the background noise lol

  • NURK FPV

    NURK FPV

    6 mesi fa

    ?

  • Serge B
    Serge B6 mesi fa

    Betafpv quality 😂

  • See Well
    See Well6 mesi fa

    Looks like a normal BetaFPV experience 🤪

  • AJ- MOODY-STATUS
    AJ- MOODY-STATUS6 mesi fa

    Big Fan 😎

  • Josh
    Josh6 mesi fa

    buzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

  • Scotty Roddis
    Scotty Roddis6 mesi fa

    Awesome concept. If only BetaFPV customer service wasn’t atrocious at best.

  • Checkered Flag Films
    Checkered Flag Films6 mesi fa

    good honest review. don't often see that these days.

  • ngentotsemua

    ngentotsemua

    6 mesi fa

    Heh

  • MoBlades
    MoBlades6 mesi fa

    Considering your relationship with Shendrones... surprised you are not testing Cinebird. This frame seems like the least desirable option of at least 2 others.

  • MoBlades

    MoBlades

    6 mesi fa

    @NURK FPV Ohh... that is right it is Stan. My mistake.

  • NURK FPV

    NURK FPV

    6 mesi fa

    Shendrones doesn't produce cinebird..

  • Canyon Racer
    Canyon Racer6 mesi fa

    Nice Nurk! Usb extension!......easy to wire up😎

  • NURK FPV

    NURK FPV

    6 mesi fa

    BUT SHOULDN'T BE NECESSARY!

  • Neil Camara
    Neil Camara6 mesi fa

    Won't the camera's power consumption make the lipo drain quickly? Or since it's connected via an adapter from fc(just guessing), I hope it doesn't reboot the camera when you make a full-throttle blip. I've experienced it before.

  • Neil Camara

    Neil Camara

    6 mesi fa

    @NURK FPV that's cool info! Thanks!

  • NURK FPV

    NURK FPV

    6 mesi fa

    relative to flight the amount of battery that the camera drains is negligible.

  • EPICFOOL28
    EPICFOOL286 mesi fa

    Thanks for a good vid, I think I might kinda like you now.. lol

  • NURK FPV

    NURK FPV

    6 mesi fa

    wait what?

  • Papadoc Fpv
    Papadoc Fpv6 mesi fa

    These rigs are cool, but almost everything being put out is for cinematic purposes. Imo always worrying about footage takes a lot of fun out of flying. I would like to see some race frames designed to hold the DJI AU, or Vista, to get decent footage without the worry of crashing a 200-500+ camera.

  • NURK FPV

    NURK FPV

    6 mesi fa

    Totally agree -- we need more stuff just for fun.

  • Mike Norris
    Mike Norris6 mesi fa

    Looks like an awesome potential there. Hope they address some of the issues. Also hope they release a digital version.

  • Mike Norris

    Mike Norris

    6 mesi fa

    Thanks I see that on the website now. I'm still a newbie. When looking at the details it shows 4 different kinds of receivers (PNP, FRSKY LBT, TBS, and FRSKY FCC). If I wanted to use this with the DJI controller and goggles, which option would I choose? Thanks for any info and help. Or would there be a better digital controller to use?

  • M Sch

    M Sch

    6 mesi fa

    Digital Version is available!

  • NURK FPV

    NURK FPV

    6 mesi fa

    totally has some huge potential

Il prossimo